| 1. Product and Company Identification |
| Suppliers Product Name |
Hyssop Essential Oil |
| Botanical Name |
Hyssopus officinale |
| INCI Name |
Hyssopus officinale (Hyssop) Essential Oil |
| Supplier |
Essential7.com |
| CAS No. |
8006-83-5 |
| EINECS |
281-677-1 |
| 3. Hazards Identification |
|
None identified |
| 4. First Aid Measures |
| INHALATION |
None - Non toxic, no action necessary |
| INGESTION |
Drink water or milk to dilute. Seek immediate medical attention. |
| EYE CONTACT |
Flush with copious amounts of water for 15 minutes. Obtain medical treatment if irritation persists. |
| SKIN CONTACT |
Remove contaminated clothing. Wash affected areas. . |
| 5. Fire-Fighting Measures |
| Flash Point |
167 deg. F |
| Hazardous combustion products |
Flammable near open flame |
| EXTINGUISHING MEDIA; |
Recommended extinguishing media: C02, dry powder or foam. Water may cause splattering. |
| FIRE FIGHTING INSTRUCTIONS |
Flammable near open flame |
| UNUSUAL FIRE AND EXPLOSIVE HAZARDS |
None |
| 6. Accidental Release Measures |
| Small/large spills |
Eliminate Source of ignition. Absorb Spills |
| 7. Handling and Storage |
| Handling |
Good industral hygiene practice requires that employee exposure be maintained below TLV. This is preferably achieved through the provision
of adequate ventilation where necessary. Where dust cannot be controlled in this way, personal respiratory protection should be employed. |
| Storage |
Store in a tight container in a cool, well ventilated area Protect from sunlight and away from sources of ignition Store below 40 deg C and above freezing |
| 8. Exposure Control/Personal Protection |
| Engineering Controls |
Use with adequate ventilation to meet exposure limits listed in section 2 |
| RESPIRATORY CONTROL |
None |
| Skin Protection |
Surgical or rubber gloves |
| Eye Protection |
Safety glasses/goggles or face shield recommended. |
| 9. Physical and Chemical Properties |
| Appearance |
Yellow transparent liquid |
| Solubility in water |
Insoluble |
| Specific Gravity |
0.939 @20deg.C |
| 10. Stability and Reactivity |
| STABILITY |
Stable |
| MATERIALS TO AVOID |
None of note |
| CONDITIONS TO AVOID |
None |
| HAZARDOUS DECOMPOSITION PRODUCTS |
No decomposition productsfound. |
| HAZARDOUS POLYMERIXATION |
None |
| 12. Toxicological Information |
| Generally non-toxic. |
| Ecological Information |
No environmental hazards are known. Avoid pollution to soil, water in accordance with local, provincial and Federal regulations. |
| 13. Disposal Considerations |
| US: Discarded product is not a hazardous waste under RCRA, 40 CFR 261 |
EC: Dispose of material in accordance with appropriate regulations |
| 14. Transport Information |
| Class/Division: not restricted |
. |
| 15. Regulatory Information Information |
US: This material is intended to be used as a cosmetic ingredient and is exempt from
Toxic Substances Control Act (TSCA) regulation (40 CFR 710) when used as such. Do not use for other purposes.
EC: This material is not classed as "Dangerous" according to the health and physical properties criteria of the
EU Directives on the classification of substances and preparations. |
Information in this material safety data sheet is compiled from our general experience and data obtained from various technical publications
and is furnished without warranty. The responsibility for the adoption of appropriate safety precautions rest solely with user. While
Essential7.com believe that the information provided herein is accurate at the date hereof, no responsibility for its
completeness or accuracy can be assumed. This information is provided solely for consideration and investigation by the user. Revised Jan 03.
|
Ingredients